Nissan Altima Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Im having trouble with my 07 Altima and wanted to see if anyone could help. The car displayed the code p0746 which is for the pressure control solenoid so I ordered the solenoid and replaced it on the valve body. When putting the valve body back in the trans I made sure that the ratio control valve was connected the right way on the stepper motor and the pin that is at the top of the trans. I put the valve body back together and added fluid but when I go to put the car into drive or reverse it does nothing but the rpms start spiking out of control when I press the gas, the car does not move anymore. Before I removed the valve body and replaced the solenoid the car would jerk when I accelerated but still drove. If anybody could help that would be great. Is there something that I have to reset after removing the valve body.
 
1 - 1 of 1 Posts
Top