Nissan Altima Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Ok so I have 2006 Altima 2.5S Auto. The car kept going into limp mode and was throwing a code for the ECU/PCM. I ordered a Plug-n-Play ECU from FS1. After I swapped the ECU the car would crank but wouldn't start. I tried reinstalling the original ECU but it still wouldn't start. I contacted a locksmith and he couldn't get it to work either and mentioned he'd only had this issue once before on a 3rd gen Altima he suggested getting an ignition, key, immobilizer, and ECU all from the same donor car and that should resolve the issue. So I've contacted FS1 in an attempt to return the ECU to them for some of my money back and got the donor parts the locksmith described. I've now swapped the entire ignition cylinder with the immobilizer and an ECU from a matching donor vehicle (2005 Altima 2.5S). But I'm still having the same issue of the car cranking but refusing to start. Anyone else have a similar issue or know where to go from here?? Please help!! This is my daily!
 
1 - 2 of 2 Posts
Top